Skip to content

Energy Conservation vs. Rationing – Part II

· 3 min

Water-related energy is among the most expensive and precious types. See the main areas of study for conserving energy in buildings.

Water-related energy is one of the most expensive and precious types, and it must be preserved rationally. Despite Brazil’s abundance of water, it is difficult to use it rationally in buildings. All residential and commercial buildings should have sewage pre-treatment.

Use air-cooled refrigeration systems, eliminating water cooling tower systems. Capture rainwater for toilet flushing. Human energy, perhaps the least considered of all, is the most valuable. How many buildings are designed and occupied by people unconcerned with work performance?

People end up consuming a large part of their physical energy overcoming the shortcomings of the physical facilities where they work. Among them we can mention: noise, lack of acoustics, excess or lack of lighting, computer screen glare, air conditioning that is too cold or too hot, poorly ergonomic chairs and furniture, colors and layouts that distract attention. The lack of logistics doesn’t allow for the interaction of people and equipment, quickly and effectively integrating departments.

Special care for human beings allows them, in their work environment, to conserve their own energy instead of only draining it during their working hours in the corporate environment.

Electrical energy is the easiest to measure — its use and cost directly affect both the work and the wallet. Many measures for the rational use of energy relate to various processes in architectural design. It’s already halfway there if the architecture is designed for energy conservation from the initial projects onward.

Main areas of study

Façades – One of the most critical areas in energy consumption. Since there is no winter in Brazil, façades have no thermal cladding. Many buildings use bricks and concrete, allowing radiation to penetrate the building, which the air conditioning then has to cool. Without thermal insulation, the cost of this waste is in the range of 15% of energy consumption. A good insulation material is glass with good shading power. Window frames reduce air conditioning consumption, accounting for another 10% of energy consumption in buildings.

Air conditioning – perhaps one of the biggest culprits of energy spending. Buildings cannot operate without control of the internal microclimate. Since natural ventilation is practically impossible, as outside city air is more polluted, many buildings were designed with underfloor air conditioning, which is cheaper to install and much more flexible. Underfloor air conditioning provides a 25% savings in energy consumption. VAV systems, air-cooled chillers, enthalpy wheels, and thermal storage tanks can generate a further 10% delta in energy savings.

Lighting – one of the factors with the greatest energy waste. Buildings are designed to be turned on in the morning and, in theory, are not turned off at night for cleaning. They are often left on all weekend. By legal requirement, all buildings are required to have 500 lux per m², forcing them to carry an unnecessary lighting load throughout the day in peripheral areas. Excess light is harmful for those who use a computer for long periods.

Presence sensors, based on infrared and ultrasound, which turn lights on or off based on people’s presence, and sensitivity sensors that dim lights by taking advantage of external light, are simple measures that, combined with a central energy management system, prevent losses.

Elevators, energy co-generation, and the management of equipment such as pumps, motors and others are handled consciously. This way, modern buildings can spend less than less efficient buildings.